dixell iPro SERIES - PWM Analogue Output for Condensation Control; V, 4 - 20 Ma Proportional Analogue Output for Servomotors;Actuators

1592025700 IPROFAMILY stp GB 2012.08.08.doc iPro Series 63/72
7.5.2 PWM analogue output for condensation control
IPG100 VERSIONS (not available for IPG200 and 4 DIN)
Recommendations:
- follow the diagram of the device used, for the numbering.
- the configuration is determined by the application.
7.5.3 0 - 10V, 4 - 20mA Proportional analogue output for servomotors/actuators
IPG-IPC IPG 4 DIN
Recommendations:
- follow the diagram of the device used, for the numbering.
- the configuration is determined by the application.