Page 19
MASTER RESET (PASSWORD REQUIRED)
Allows the service technician to restore factory defaults to the machine or reset the controller board’s memory after
reconfiguring a tray. Since this feature resets sales data, care should be taken prior to using.
Press the letter “F” on the keypad and “MASTER RESET * = Y” will scroll across the display. Press the “*” key and
the display will read “PW”. Enter the password and the display will read “OK” momentarily and then will return to the
idle message.
After using this feature, the service technician must go to the SERVICE MODE or TEST MODE and CLEAR
ERRORS.
The table below outlines the result of using MASTER RESET.
ITEM RESET TO
CASH BOX $0.00
SALES $0.00
NUMBER SOLD 0
TOTAL SALES $0.00
REGULAR PRICES $1.00
HAPPY HOUR PRICES $1.00
MAXIMUM CREDIT $5.00
DROP SENSOR
VER 1.26 and ↑
DISABLED VER 1.26
ENABLED VER 1.27-1.30
DISABLED VER 1.31 and ↑
COOL DOWN TIME 0
COOL DOWN PERIOD CLEARED
HAPPY HOUR TIMES CLEARED
NOT AVAILABLE TIMES CLEARED
ESCROW Y ESCROW N
FORCE Y FORCE N
DISABLE ITEM ENABLED
DOOR OPENINGS 0
POWER OUTAGES 0
WINNER MODE 0
MACHINE NUMBER 1
IDLE MESSAGE DEFAULT MESSAGE
PASSWORD 0000
DATE/TIME NO CHANGE
To Next Page
Loading...
