Page 20
MACHINE NUMBER (PASSWORD REQUIRED)
Allows assigning a user number to the machine for audit and/or inventory control requirements.
Press the number "1" on the keypad and "MACHINE NUMBER ##" will scroll across the display (the ## displayed is
the number currently assigned to the machine). Press the "*" key and the display will read "PW". Enter the
password, the display will read "OK" momentarily, then "NUMBER" will be displayed. Enter the new number
(numeric field, 5 characters maximum) If the new number is less than 5 characters press the "*" key after entering
it. The display will return to "SETUP MODE".
SET HAPPY HOUR (PASSWORD REQUIRED)
Allows the service technician to set times and days for Happy Hour operation.
Press the number "2" on the keypad and "SET HAPPY HOUR" will scroll across the display. Happy hour start time,
end time, and days of the week can now be programmed into the system. All times must be entered in military time
format (24 hour clock). Setting Happy Hour is covered in detail in the INITIAL PROGRAMMING section of this
manual. See pages 38, 39, 40, and 41. Press the "CLR" key to return to "SETUP MODE".
SET NOT AVAILABLE (PASSWORD REQUIRED)
Allows the service technician to set times and days for periods, use of the machine is to be restricted.
Press the number "3" on the keypad and "SET NOT AVAILABLE" will scroll across the display. Not available start
time, end time, and days of the week can now be programmed into the system. All times must be entered in military
time format (24 hour clock). Only one not available period of time per 24 hours may be set using this feature.
Setting Not Available is covered in detail in the INITIAL PROGRAMMING section of this manual. See pages 42 and
43. Press the "CLR" key to return to "SETUP MODE".
WINNER MODE (PASSWORD REQUIRED)
Allows the service technician to set the machine up to dispense a free product on a random basis. This mode
CANNOT be made item selective. If set, each product in the machine is subject to being dispensed free. The
winning customer is determined by the program picking a number at random from 1 to the winner mode set number.
Inputting a 0 disables this mode.
Press the number "4" on the keypad and "WINNER MODE ##" will scroll across the display (the ## is the current
setting). Press the "*" key and the display will read "PW". Enter the password and the display will read "OK"
momentarily then "MODE" will be displayed. Enter a number from 1 to 255 and press the "*" KEY. The mode is set
and the display returns to "SETUP MODE".
DATE/TIME
Shows the day, date, and time setting currently in the system in the following format: SUN 09/08/96 1330
Press the number “5” on the keypad and the day, date, and time will scroll across the display. Setting the day, date,
and time is covered in detail in the INITIAL PROGRAMMING section of this manual. See page 35.
Press the "CLR" key to return to "SETUP MODE".
TOTAL SALES
Shows the total sales since the machine’s manufacture or the last MASTER RESET. This total is not cleared by
CLEAR TOTALS.
Press the number “6” on the keypad and the display will read “TOTAL SALES $###.##”.
Press the "CLR" key to return to "SETUP MODE".
MAX CREDIT
Allows the service technician to set the maximum credit which can be established during a vend. If credit
accumulates to this point the coin mechanism and bill validator are disabled. After a purchase is made, both will be
re-enabled. It is very important that the service technician ensure this value is higher than the highest priced
product.
Press the number “7” on the keypad and “MAX CREDIT $#.##” ($#.## is the current setting) will scroll on the
display. To change this setting press the “*” key and the display will read “$0.00”. Enter the new amount and press
the “*” key. The new setting is entered and the display returns to "SETUP MODE”.
To Next Page
Loading...
