DKS 1802 - Caution 34 3.4.7; Delete ALL Five-Digit Entry Codes; Delete Individual Five-Digit Entry Code; Five-Digit Entry Code Divide Number to Activate Relays

1802-065-D-10-14
34
This programming sequence programs five-digit entry codes into the system memory. The number of five digit entry codes
that can be programmed is limited to six. We suggest that all entry codes that are programmed into the system be listed with
the names of residents that they have been assigned to (see log tables in back of this manual).
3.4.5 Programming Five-Digit Entry Code
1. Press and enter your four-digit MASTER CODE (beep).
2. Enter the five-digit entry code, then press (beep).
3. Repeat step 2 to enter additional entry codes.
4. Press together to end this programming sequence (beeeeeep).
?
?
?
?
?
?
?
?
9
9
WXYZ
WXYZ
0
0
OPER
OPER
0
0
OPER
OPER
The five-digit entry codes can be made to activate either relay 1 or relay 2 by programming a five-digit divide number.
Five-digit entry codes equal to or less than the divide number will activate relay 1. Five-digit entry codes greater than the
divide number will activate relay 2.
TIP: you can make ALL five-digit entry codes (except 0000) activate Relay 2 by programming divide number 00000, or make
ALL five-digit entry codes activate Relay 1 by programming divide number 99999.
Factory default divide number is 99999 - Activates Relay 1.
3.4.8 Five-Digit Entry Code Divide Number to Activate Relays
1. Press and enter your four-digit MASTER CODE (beep).
2. Enter the five-digit divide number, then press (beep).
3. Press together to end this programming sequence (beeeeeep).
?
?
?
?
?
?
?
?
3
3
DEF
DEF
1
1
SP
SP
0
0
OPER
OPER
3.4.6 Delete Individual Five-Digit Entry Code
1. Press and enter your four-digit MASTER CODE (beep).
2. Enter the five-digit entry code to be deleted, then press (beep).
3. Repeat step 2 to delete additional entry codes.
4. Press together to end this programming sequence (beeeeeep).
?
?
?
?
?
?
?
?
0
0
OPER
OPER
1
1
SP
SP
0
0
OPER
OPER
3.4.7 Delete ALL Five-Digit Entry Codes
1. Press and enter your four-digit MASTER CODE (beep).
2. Press then press (beep).
This programming sequence will automatically end itself by a long (beeeeeep).
?
?
?
?
?
?
?
?
1
1
SP
SP
1
1
SP
SP
This programming step deletes ALL five-digit entry codes that have been programmed into the system.
CAUTION: This programming CANNOT be UNDONE!
9
9
WXYZ
WXYZ
9
9
WXYZ
WXYZ
9
9
WXYZ
WXYZ
9
9
WXYZ
WXYZ