5.3 Accessories
The following accessory items are available for the model 6001 and 6002 swing gate operators.
Photo Cell Non-contact (photo-cells) sensors for use as a secondary entrapment
protection device.
EMX Industries, Inc., Model IRB-325
MMTC, Inc., Model E3K-R10K4-NR
Loop Detector Detectors plug directly into ports on circuit board simplifying wiring.
P/N 9405-010 - Single channel detector
P/N 9406-010 – Two-channel detector
Magnetic Lock Magnetic lock provides an excellent means to secure swing gates and is
a fail-safe device allowing emergency vehicle access upon power
outage.
P/N 1216-080 or 1216-081
Time Clock 7 day and 365 day time clocks can be used to automatically open gate at
pre-set time and days. Compact clock fits inside the operator.
P/N 2600-791 - 7 day clock P/N 2600-795 - 365 day clock
Torsion Rods Torsion rod assembly is used on uphill swing gates for counter balance.
P/N 1203-083
Hinges Heavy-duty ball bearing hinges provide easy swing gate operation.
P/N 1200-009 - Two required.
Surge Devices High and low voltage surge suppressers help prevent circuit board failure
caused by lightning strikes and power surges.
P/N 1876-010 - High Voltage, P/N 1878-010 - Low Voltage
Gate Scale Use to test torque required to move gate. P/N 2600-225
Speed Bumps Prefabricated six-foot speed bump reduces traffic speed through gate
system. P/N 1610-150
Solar Panels 10 Watt solar panels provide charge to the batteries. Two required.
P/N 2000-075
Batteries Replacement batteries, 12 Volt 3 Amp Hour. Two required.
P/N 1801-009
Fuse Replacement fuse – 5 Amp
P/N 4601-058
Page 40
To Next Page
Loading...
