26 734 Installation and Programming Guide | Digital Monitoring Products, Inc.
Require Site Code
Press the top row select key or area under YES to use a site
code and press CMD to view the site code entry display.
Press NO to advance to NO OF USER CODE DIGITS. Default
is NO.
In addition to user code verification, door access is only
granted when any one site code programmed at the SITE
CODE ENTRY option matches the site code received in the
Wiegand string.
Site Code Display
You can program up to eight 8‑digit site codes. The site code
range is 0‑16,777,214.
In the keypad display, enter site code 1 and press CMD. The
display will ask for site code 2 followed by site code 3 and
so on. When you have selected the site code you want to
change, press CMD.
REQUIRE SITE
CODE: NO YES
SITE CODE 1:
To Next Page
Loading...
