Digital Monitoring Products, Inc. | 734 Installation and Programming Guide 33
ULC Commercial Burglary (XR150/XR550 Series Panels)
When using the zones of the 734 in a listed application, place the module in a listed
enclosure and connect a DMP Model 307 Clip‑on Tamper Switch to the enclosure
programmed as a 24‑Hour zone.
The 734 Access Control features have not been investigated by ULC.
The 734 zones can be used in a Low Risk application. For Medium or High Risk
applications, refer to the Dual Zone Protection diagram in the XR150/XR550 Canadian
installation guide.
To Next Page
Loading...
