32 734 Installation and Programming Guide | Digital Monitoring Products, Inc.
COMPLIANCE LISTING SPECIFICATIONS
UL Commercial Fire
The 734 Interface Module must be used in conjunction with at least one DMP 630F
keypad.
Any Auxiliary Power Supplies must be regulated, power limited, and listed for Fire
Protective Signaling Service.
UL Access Control
The access relay must be configured as fail‑safe or fail‑secure as determined by the local
Authority Having Jurisdiction (AHJ). This system is not intended to be used in place of
listed panic hardware.
The power supply must be a listed commercial burglary/household fire, power limited,
Class 2 with a compatible voltage range for the product. The 734 requires a 12 or 24VDC
power source.
To Next Page
Loading...
