DMP Electronics XR100 User Manual

XR500/XR100 User’s Guide 23User Menu
User Menu
Many system features are programmed into a User Menu that you
can access from any keypad. The menu requires you to enter your
user code and then it only shows those functions to which you have
access.
Accessing the User Menu
1. Press the COMMAND key, if the multi-language option
is enabled, the available languages display. Select the
language to use for text display.
2. Press the COMMAND key until MENU? NO YES displays.
3. Select YES. The keypad displays ENTER CODE: –. Enter
your user code and press COMMAND. You can now scroll
down through the list of system features available to you.
User Menu Options
The list below shows the User Menu options in order:
Menu Option Description
ALARM SILENCE Silences an alarm bell or siren.
SENSOR RESET Resets smoke or glassbreak detectors that
have latched due to an alarm condition.
DOOR ACCESS Momentarily opens the keypad door lock
relay.
ARMED AREAS Displays the name of any areas in the system
that are currently in the armed state.
OUTPUTS ON/OFF Allows you to turn on or off any of the
outputs described in the System Setup
section of this guide.
ZONE STATUS Allows you to see if a zone is either armed,
bypassed, in alarm, open, or shorted.
BYPASS ZONES Allows you to Bypass a zone or reset an
already bypassed zone.
ZONE MONITOR Allows you to add or remove a zone from the
monitor mode.
SYSTEM STATUS Displays the current condition of the system
AC power, backup battery, and optional
panel tamper.
SYSTEM TEST Tests the system siren, communication to
the central station, and backup battery on
all XR500 Series and XR100 Series panels.
XR500N or XR500E panels allow additional
panic zone testing.
USER PROFILES Allows you to add, delete, or change user
proles.
USER CODES Allows you to add, delete, or change user
codes.
SCHEDULES Allows you to add, remove, or change
system schedules.
TIME Allows you to change the Day, Date, or Time
that is currently programmed in the system.
DISPLAY EVENTS Allows you to view or print the last 10,000
door accesses or 2,000 system events that
occurred on your system.
SERVICE REQUEST Allows you to send a message to the Central
Station requesting service on the alarm
system.
FIRE DRILL Allowsyoutotestthesystemrebells.

DMP Electronics XR100 Specifications

General

Brand	DMP Electronics
Model	XR100
Category	Security System
Language	English