Appendix E62 XR500/XR100 User’s Guide
Appendix E
Easy Entry™ User’s Guide
Door Strike
From the Status List, present your card to the reader. Once validated by the system,
the Door Strike relay activates. If you are entering an armed area to which you are
assigned, accessing the area automatically causes it to be disarmed.
While the keypad displays the Status List, present your access card. The relay activates
momentarily during which you must open the door. Once you open the door, you have
30 seconds to exit and close the door before the zone 2 Soft-Shunt expires and triggers
an alarm.
Arming and Disarming an Area System
Press Command, the keypad displays ARM DISARM.
Press the Select key under the desired option.
The keypad displays ENTER CODE- . Present
your card to the reader. Once validated by the
system, all areas assigned to your code arm or
disarm automatically. Select NO to arm or disarm
individual areas. Select YES, or simply wait, and
the keypad automatically arms or disarms all areas
for which you are authorized.
ABC SECURITY
ARM DISARM
ABC SECURITY
ARM DISARM
ABC SECURITY
ENTER CODE: –
ABC SECURITY
ALL? NO YES
To Next Page
Loading...
Need help?
General
