DMP Electronics XR100 User Manual

30 XR500/XR100 User’s Guide User Menu
Output Group Assignment-Eachprolemaybeassignedanoutput
groupnumberfrom1to10.Defaultforprole1to98isNOoutput
group assigned.  Defaultfor prole99 is output group 10. Your
system may by programmed to turn on an output group at certain
keypads when door access occurs.
User Menu Assignments -Eachuserprole may have anyofthe
menus assigned to it as shown in the User Prole Record.  The
UserProleRecordliststheusermenuproleassignmentsandthe
systemfunctionsusersareallowedtoaccessbasedontheprole
numbers assigned to their codes.
Adding User Profiles
1. Access the User Menu. Press COMMAND to USER PROFILES?.
2. Press any Select key. The keypad displays ADD DEL CHG.
SelectADDtoaddanewuserprole.
3. AtthePROFILENO:-option,enteranunusedprolenumber
and press COMMAND. The display changes to PROFILE NAME.
4. Press any Select key.  Enter a prole name of up to 32
characters. Press COMMAND. See Appendix C.
5. At the ARM/DIS AREAS: option, select the area numbers for
arminganddisarmingassignedtothisprole.
6. The keypad displays ACCESS AREAS: . Select the area
numbers assignment to allow door access for this prole.
Press the COMMAND key.
7. The keypad displays OUTPUT GROUP: -. Enter the number for the
OutputGroupassignedtothisprole.PresstheCOMMANDkey.
8. The keypad displays each of the menus as shown in the
Prole Table for you to enable for this prole number.
Select YES or NO and press the COMMAND key to advance to
the next menu Selection.
9. When you have completed selecting all User Prole menu
assignments, the keypad displays the PROFILE ## ADDED
message for 4 seconds.
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
usetheAddUserProlesbrowser.
Changing User Profiles
1. Access the User Menu.
2. Press COMMAND until USER PROFILES? displays.
3. Press any Select key. The keypad displays ADD DEL CHG.
4. SelectCHGtochangeauserprole.
5. At the PROFILE NO: - option, enter a prole number and
press COMMAND. The display changes to PROFILE NAME.
Note: The panel’s authority check determines whether your
User Prole is authorized to change another prole.  The
message NO AUTHORITY appears if you are not authorized
tochangetheprole.
6. PressanySelectkeytodisplay-.Enteraprolenameofup
to32characters.ThedefaultProleNameusestheProle
Number. Enter the name and press COMMAND.
7. At the ARM/DIS AREAS: option, enter the area numbers for
arminganddisarmingassignedtothisprole.
8. The keypad displays ACCESS AREAS: . Enter the area
numbers assignment to allow door access for this prole.
Press the COMMAND key.
9. The keypad displays OUTPUT GROUP: -. Enter the number
for the Output Group assigned to this prole.  Press the
COMMAND key.
10. The keypad displays each of the menus as shown in the
ProleTable.Youthenenableordisablethemenufunction
for this prole number.  Select YES or NO and press the
COMMAND key to advance to the next menu selection.
11.When you complete Selecting all User Prole menu
assignments, the keypad displays the PROFILE CHNGD
message for 4 seconds, indicatingtheproleischanged.

DMP Electronics XR100 Specifications

General

Brand	DMP Electronics
Model	XR100
Category	Security System
Language	English