XR500/XR100 User’s Guide 39User Menu
Note: After Selecting the day of the week for the schedule to
occur, the keypad displays any currently programmed ON OFF
times previously set for that day. This feature allows you to
review programmed schedules at any time.
8. If ON OFF times display, the keypad then displays DELETE
KEEP. Select DELETE to enter new times.
9. The keypad then displays ON TIME?. This is followed by the
display – : AM PM.
Enter a new relay ON time and select AM or PM.
The display changes to OFF TIME?. This is followed by the
display – : AM PM.
Enter a new OFF time for the relay.
Enter all schedule times using a 12 hour clock. For example,
to enter 6 AM you would enter 0 + 6 + 0 + 0 and select AM.
For 11 PM you would enter 1 + 1 + 0 + 0 and select PM.
10. The keypad returns to the day of the week display allowing
you to enter another Output or Door schedule. To exit the
user menu or to go back to the S1 S2 S3 S4 display, press
the Back Arrow key.
Setting Holiday ABC Schedules for S1, S2, S3, S4,
OUT, and DOOR Schedules
Three Holiday schedules are available for each shift (S1, S2, S3,
S4), each output relay (OUT), each door access relay (DOOR),
and through their respective menu options. This allows a shift,
output, or door to have three different schedules for holidays.
For example, Holiday Schedule A for those holidays when the
building stays closed, Holiday Schedule B for a day that only opens
for a morning, etc. Also, Holiday Schedules can be used to cross
multiple days. These schedules become active and supersede the
current day’s schedule when a Holiday Date occurs. See Setting
Holiday Dates (HOL).
1. After you have accessed the SCHEDULES? menu and the
schedule options, S1 S2 S3 S4, display, press the COMMAND
key until the display changes to SUN MON TUE WED. Press
the COMMAND key again to display THU FRI SAT HOL.
2. Select HOL to program holiday schedules.
3. ThekeypaddisplaysHOL:ABC.SelectAtosettherstof
three holiday schedules.
4. The keypad displays A - : AM PM.
To Next Page
Loading...
Need help?
General
