36 XR500/XR100 User’s Guide User Menu
Ambush Code
Your system may be programmed to allow user number 1 to be
used as an Ambush code. This Ambush code functions identically
to a standard code with the exception that it sends a silent alarm
to the central station. This silent alarm alerts the operator
to a duress situation at the premises and prompts immediate
noticationofauthorities.
Refer to the System Setup section of this guide to see if your
system is programmed for Ambush. If so, do NOT program a code
for user number 1 unless you intend to use the Ambush function.
Schedules
Schedules are ideal for individual area auto arming and disarming
and for creating Opening/Closing windows during which users
can access the building or disarm the system. Having separate
schedules allows you to create Opening/Closing windows for each
day. One could be for normal business activity and another could
be for cleaning crews or a second shift. Once programmed, these
schedules operate continually until changed.
The Schedules function allows you to program into the system the
times at which you normally turn your burglary protection on and
off each day of the week. Your system may be pre-programmed
at installation to allow automatic arming and disarming. When
pre-programmed, you can enter a schedule for the arming and
disarming times.
If your system does not use automatic arming, you can use the
Closing Check/Extend feature with Schedules to help ensure your
systemisarmedmanuallyataspecictime.Thisoptionsounds
the keypad buzzer and displays CLOSING TIME! or AREA LATE! when
a schedule expires. This reminds users still on the premises to arm
the system or extend the schedule to a later time.
To Next Page
Loading...
Need help?
General
