DMP Electronics XR100 - Setting Holiday Dates (HOL)

40 XR500/XR100 User’s Guide User Menu
Note: After Selecting the schedule, the keypad displays any
current times previously set for that holiday. This feature allows
you to review the programmed times.
5. If times display, the keypad then displays DELETE KEEP.
Select DELETE to enter new times.
6. The keypad then displays ON TIME? or OPENING TIME?. This
is followed by the display – : AM PM.
Enter a new time and select AM or PM.
The display changes to OFF TIME? or CLOSING TIME?. This is
followed by the display – : AM PM.
Enter a new time.
Enter all schedule times using a 12 hour clock. For example,
to enter 6 AM you would enter 0 + 6 + 0 + 0 select AM. For
11 PM you would enter 1 + 1 + 0 + 0 and select PM.
7. The keypad returns to HOL: A B C allowing you to enter a
B and/or C holiday schedule for the same Shift (S1, S2, S3,
or S4), Output or Door. Go back to step 3 to add additional
holiday schedules.
Setting Holiday Dates (HOL)
Setting Holiday Dates provides the system with dates in the year
when the normal opening and closing schedules are not used and
superseded by one of the Holiday Schedules A or B or C. When
the panel determines that it is a holiday, the Holiday Schedule
supersede the current schedule for that day. Up to twenty
different holiday dates can be entered.
1. After you access the SCHEDULES? menu and the schedule
options, S1 S2 S3 S4, display, press the COMMAND key
once more. The display changes to OUT DOOR HOL EXT.
Select HOL to program Holiday dates.
2. The keypad display changes to HOL: xx mm/dd A. You can
QRZHQWHUWKHPRQWKDQGGD\IRU WKH ÀUVWKROLGD\6HOHFW
A to change to HOL B. Pressing again changes to HOL C.
Example: July fourth would be entered by pressing the 0704
keys. The keypad displays HOL:1 07/04 B.
3. To step to the next holiday number, press COMMAND. To
clear a holiday press any top row Select key when the
appropriate holiday number displays. Press the Back
Arrow key when HOL: 1 or the COMMAND key when HOL: 20
displays to exit the menu.
Note: The Holiday Dates entered indicate the days of the year
when HOL schedules are used. For information on setting holiday
schedules for Shift, Output, and Door, see Setting Holiday ABC
Schedules.