Digital Monitoring Products, Inc. | XR Fire Control Panel User Guide 37
Adding User Codes
1. Access the USER CODES? display. Press any Select Key. The keypad
displays ADD DEL CHG BAT.
2. Press the Select Key under ADD or BAT (Batch) to add a new user code.
3. At the USER NUMBER prompt, enter a user number and press COMMAND.
The display changes to USERCODE.
Note: Do not program a code for user number 1 unless you intend to
use the Ambush function, see Ambush Codes.
4. Enter a user code of 3 to 6 digits and press COMMAND. The user enters
this number to arm, disarm, etc. After entering the code the keypad
displays USER NUMBER ### as the user name.
5. A 16-character name may be entered to identify the user. Press any top row
key to clear the current name. Enter the new name and press COMMAND.
6. The display changes to PROFILENO. Select the profile number to assign a
set of authorized functions to the user code.
7. At the PROFILE NO display, enter a profile number from 1 to 99, and press
COMMAND. The displays shows USER#ADDED.
To Next Page
Loading...
Need help?
General
