XR200/XR2400F Programming Guide Digital Monitoring Products
25
11.1 Printer Reports
This section allows you to define the operation of a local printer connected to the
panel through the use of a DMP 462P Printer Interface Card. The 462P allows you
to connect the DMP SCS-PTR or other compatible 40-character or 80-character
serial printer to the panel.
Printing the panel's event buffer
The Display Events option in the User Menu contains a PRINT command that allows
the user to send the contents of the panel's event buffer to a local printer. The
PRINT option is visible whether or not a 462P Printer Interface Card is attached to
the panel.
11.2 Arm and Disarm Reports
Prints arming, disarming, and Late to Close reports. Includes the area number,
name, and action (armed, disarmed, or late), the user number, user name, and
time and date.
11.3 Zone Reports
Prints changes in the status of active zones. Includes the zone number, name, and
type as well as the action (alarm, trouble, bypass, etc.) user number (if
applicable) and area name.
11.4 User Command Reports
Prints user code changes, outputs turned on or off (if operated by a schedule, SCH
is shown in Display Events in place of the user number), schedule changes, and
User Menu functions.
11.5 Door Access Reports
Prints door access activity. Includes the door number, user number and name, and
the time and date of the door access.
11.6 Supervisory Reports
Prints System Monitor Troubles and system events. See Status List - System
Monitor Troubles.
PRINTER REPORTS
ARM/DIS NO YES
ZONE NO YES
USR CMDS NO YES
DOOR ACS NO YES
SUPV MSG NO YES
11 - PRINTER REPORTS
To Next Page
Loading...
