EasyManuals Logo

DMP Electronics XT30 Installation Guide

DMP Electronics XT30
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
XT30/XT50 Installation Guide Digital Monitoring Products
3
SYSTEM COMPONENTS
3.3 Accessory Devices
Cellular Communicator Cards
263C CDMA Cellular
Communicator Card
Allows you to connect the XT30/XT50 Series to any compatible CDMA/SMS network.
263H HSPA + Cellular
Communicator Card
Allows you to connect the XT30/XT50 Series to any compatible HSPA+/SMS network.
The 263H is compatible with XT30 and XT50 Series control panels, version 112 or higher.
Zone and Output Expansion Modules
710 Bus Splitter/Repeater Increases keypad wiring distance to 2500 feet.
711 Single Point Zone Expander Provides one Class B zone for burglary devices and non-powered re devices.
712-8 Zone Expander Provides 8 zones for burglary devices.
714, 714-8, 714-16 Zone Expander
Provides Class B zones for burglary and non-powered re devices.
715, 715-8, 715-16 Zone Expander Provides 12VDC Class B powered zones for smoke detectors, glassbreak detectors, and other
2- or 4-wire devices.
860 Relay Output Module Provides one relay and three relay sockets for expansion of up to four relays.
Interface Module
734 Wiegand Interface Module Provides arming, disarming, and codeless entry using access control readers.
738Zplus Z-Wave Interface
Module
Provides connection for Z-Wave modules.
Wi-Fi Module
763 Module Allows you to add Wi-Fi alarm signal communication to XT30/XT50 panels, version 124 or
higher with Level L hardware.
DMP Two-Way Wireless Devices
1100D/1100DH/1100DI Receiver Supports transmitters in residential or commercial wireless operation on the keypad bus.
1100R Repeater Provides additional range for wireless devices.
1101 Universal Transmitter Provides both internal and external contacts that may be used at the same time to yield
two individual reporting zones from one wireless transmitter. Provides Disarm/Disable
functionality.
1102 Universal Transmitter Provides one external contact. Provides Disarm/Disable functionality.
1103 Universal Transmitter
Provides bothinternalandexternalcontactsthatmaybeusedatthesametimetoyieldtwo
individualreportingzonesfromonewirelesstransmitter.RequiresEOLresistorforexternal
contact. Provides Disarm/Disable functionality.
1106 Universal Transmitter Provides both internal and external contacts that may be used at the same time to yield
two individual reporting zones from one wireless transmitter. Provides Disarm/Disable
functionality.
1107 Micro Window Transmitter* Provides a window transmitter and magnet
1114 Four-Zone Expander* Provides four wireless zones with EOL resisters.
1115 Wireless Temperature Sensor
and Flood Detector
Temperature and ood detector wth an internal temperature sensor. Can be paired with
470PB or T280R remote sensors.
1116 Relay Output* Provides one Form C relay.
1117 LED Annunciator* Provides a visual system status indicator.
1119 Door Sounder* Provides a battery operated sounder
1121 PIR Motion Detector* Provides motion detection with pet immunity.
1126R PIR Motion Detector* Ceiling mount motion detector with panel programmable sensitivity and Disarm/Disable
functionality.
1127C/1127W PIR Motion
Detector
Wall mount motion detector with panel programmable sensitivity and Disarm/Disable
functionality.
1129 Glassbreak Detector* Detects the shattering of framed glass mounted in an outside wall and provides full-pattern
coverage and false-alarm immunity.
1131 Recessed Contact*
Provides concealed protection for doors, windows or other applications.
1135 Siren* Provides a wireless siren
1137 Wireless LED Emergency
Light
Provides path lighting in the event of an alarm or trouble such as Burglary Alarm Output or
can be activated simultaneously by the panel via the Trip with Panel Bell feature.
1139 Bill Trap* Provides a silent alarm option for retail and banking cash drawers.
1141 Wall Button* One button wall mounted wireless transmitter.
1142BC Two-button Panic Belt
Clip Transmitter
Provides portable two-button panic operation.
1142 Two-button Panic
Transmitter
Provides permanently mounted under-the-counter two-button panic operation.
* These devices have not been investigated and shall not be used in listed installations

Table of Contents

Other manuals for DMP Electronics XT30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DMP Electronics XT30 and is the answer not in the manual?

DMP Electronics XT30 Specifications

General IconGeneral
BrandDMP Electronics
ModelXT30
CategoryControl Panel
LanguageEnglish

Related product manuals