28 XT30/XT50 User Guide User Menu
STATUS of Z-Wave Devices
1. Access the User Menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any select key or area. The keypad displays ADD LIST
REMOVE.
4. Select LIST to display DEVICE LIST and the rst Z-Wave
device stored. Press the CMD key to advance through the
list of Z-Wave devices.
5. Press any select key or area to display DEVICE RENAME
STATUS.
6. Select STATUS to conrm radio communication with the
Z-Wave device.
7. The device name and OKAY displays when the device stored
in the system communicates.
8. Press the CMD key to return to the device list and display
the next device in the list.
9. If the device stored in the system does not communicate,
the device name and FAILED displays. Press the CMD key and
REMOVE FAILED DEVICE displays.
10. Select YES to remove the failed device from the system
memory. Select NO to leave the device in the system
memory and to return to the device list.
11. When the device has been removed, the device name and
REMOVED is displayed and the system no longer tries to
communicate with the Z-Wave device.
Remove Z-Wave Devices (REMOVE)
Each Z-Wave device added to your system remains in your system
unless it is removed. This option allows you to remove Z-Wave
devices from your system.
1. Access the User Menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any select key or area. The keypad displays ADD LIST
REMOVE.
4. Select REMOVE. PROCESSING may briey display. When
PRESS BUTTON ON DEVICE TO REMOVE displays, press the
program button on the Z-Wave device, the device name and
REMOVED is displayed to indicate the Z-Wave device has
been removed.
5. PRESS BUTTON ON DEVICE TO REMOVE displays allowing you
to remove another Z-Wave device. See the Z-Wave device’s
documentation for more information.
6. When all devices have been removed, press the back arrow.
Favorites (FAV)
Z-Wave devices can be grouped together to create a Favorite. This
option allows you to program up to 20 Favorites in your system and
then ADD, EDIT OR REMOVE up to 25 Z-Wave devices in a Favorite.
When activated from the FAVORITE user menu, a CMD is sent to its
Z-Wave Devices. A Favorite can only be activated, or turned on.
A separate Favorite must be created to change the conditions set
by the rst Favorite. For example, a Favorite called “Movie Night”
could lock the exterior doors, close the garage door, adjust the
temperature, and dim the lights in the family room to the desired
level. Another Favorite called “Wakeup” could then turn on the
lights, adjust the temperature, unlock the exterior doors, and raise
the garage doors.
To Next Page
Loading...
Need help?
General
