doble TDR900 - Figure 28. Test Plan -Main Contact Channels Sub-Tab - Default; Figure 29. Test Plan -Main Contact Channels Sub-Tab - OCB Selected

Doble TDR900 User Guide
72A-2612-01 Rev. A 09/06
39
Figure 28. Test Plan –Main Contact Channels Sub-tab – Default
If an overall test (OCB test) type of measurement is required, check the phases to be
measured. This disables the sectional (EHV) test options, as shown in Figure 29.
Figure 29. Test Plan –Main Contact Channels Sub-tab – OCB Selected
If any sectional test (EHV) is checked, the OCB options are disabled, Figure 30.