Dodge 2000 DURANGO - Page 16

45,000 Miles (72 000 km) or at 36 months
• Change engine oil.
• Replace engine oil filter.
• Lubricate front suspension ball joints if
required.
• Inspect front wheel bearings.
• Inspect brake linings.
• Flush and replace engine coolant at 36 months,
regardless of mileage.
52,500 Miles (84 000 km) or at 42 months
• Change engine oil.
• Replace engine oil filter.
• Flush and replace engine coolant if not done at
36 months.
60,000 Miles (96 000 km) or at 48 months
• Change engine oil.
• Replace engine oil filter.
• Replace engine air cleaner element.
• Replace ignition cables (5.2L & 5.9L).
• Inspect PCV valve, replace as necessary.*
• Replace spark plugs.
• Inspect auto tension drive belt and replace if
required (5.2L & 5.9L).
• Drain and refill automatic transmission fluid
and change filter (4.7L).
67,500 Miles (108 000 km) or at 54 months
• Change engine oil.
• Replace engine oil filter.
• Lubricate front suspension ball joints if
required.
• Inspect front wheel bearings.
• Inspect brake linings.
75,000 Miles (120 000 km) or at 60 months
• Change engine oil.
• Replace engine oil filter.
• Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).
• Drain and refill transfer case.
• Flush and replace engine coolant if it has been
30,000 miles (48 000 km) or 24 months since last
change.
• Inspect auto tension drive belt and replace if
required.
82,500 Miles (132 000 km) or at 66 months
• Change engine oil.
• Replace engine oil filter.
• Flush and replace engine coolant if it has been
30,000 miles (48 000 km) or 24 months since last
change.
90,000 Miles (144 000 km) or at 72 months
• Change engine oil.
• Replace engine oil filter.
• Replace engine air cleaner element.
• Inspect PCV valve, replace as necessary.*
• Replace spark plugs.
• Lubricate front suspension ball joints if
required.
• Inspect front wheel bearings.
• Inspect brake linings.
• Inspect auto tension drive belt and replace if
required.
• Drain and refill automatic transmission fluid
and change filter (4.7L).
97,500 Miles (156 000 km) or at 78 months
• Change engine oil.
• Replace engine oil filter.
105,000 Miles (168 000 km) or at 84 months
• Change engine oil.
• Replace engine oil filter.
• Flush and replace engine coolant if it has been
30,000 miles (48 000 km) or 24 months since last
change.
• Inspect auto tension drive belt and replace if
required.
112,500 Miles (181 000 km) or at 90 months
• Change engine oil.
• Replace engine oil filter.
• Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).
• Drain and refill transfer case fluid.
• Lubricate front suspension ball joints if
required.
• Inspect front wheel bearings.
• Inspect brake linings.
• Flush and replace engine coolant if it has been
30,000 miles (48 000 km) or 24 months since last
change.
120,000 Miles (192 000 km) or at 96 months
• Change engine oil.
• Replace engine oil filter.
• Replace engine air cleaner element.
• Replace ignition cables (5.2L & 5.9L).
• Inspect PCV valve, replace as necessary.*
• Replace spark plugs.
• Inspect auto tension drive belt and replace if
required.
• Drain and refill automatic transmission fluid
and change filter (4.7L).
*This maintenance is recommended by Chrysler
Corporation to the owner but is not required to main-
tain the warranty on the PCV valve.
0 - 4 LUBRICATION AND MAINTENANCE DN
SERVICE PROCEDURES (Continued)