Install wheel on vehicle, and tighten to proper
torque specification.
CLEANING AND INSPECTION
CLEANING TIRES
Remove the protective coating on the tires before
delivery of a vehicle. This coating may cause deteri-
oration of the tires.
To remove the protective coating, apply warm
water and let it soak for a few minutes. Afterwards,
scrub the coating away with a soft bristle brush.
Steam cleaning may also be used to remove the coat-
ing.
NOTE: DO NOT use gasoline, mineral oil, oil-based
solvent or a wire brush for cleaning.
SPECIFICATIONS
TIRES REVOLUTIONS PER MILE
Fig. 9 Remount Tire 90 Degrees In Direction of
Arrow
1 – 2ND HIGH SPOT ON TIRE
2 – 1ST HIGH SPOT ON TIRE
Fig. 10 Tire Repair Area
1 – REPAIRABLE AREA
TIRE SIZE SUPPLIER
REVOLUTIONS
PER MILE
P235/75R15 XL MICHELIN 720
P235/75R15 XL GOODYEAR 729
P275/60R17 GOODYEAR 697
31x10.50R15 LT GOODYEAR 689
22 - 6 TIRES AND WHEELS DN
SERVICE PROCEDURES (Continued)
To Next Page
Loading...
