Dodge 2000 DURANGO - Hood Seal; Front Wheelhouse Liner

INSTALLATION
(1) Position cowl seal on flange and press into
place.
HOOD SEAL
REMOVAL
(1) Remove push-in fasteners attaching hood seal
to inner hood panel (Fig. 11).
(2) Separate hood seal from vehicle.
INSTALLATION
(1) Position hood seal on inner hood panel.
(2) Install push-in fasteners attaching hood seal to
inner hood panel.
FRONT WHEELHOUSE LINER
REMOVAL
(1) Raise and support the front wheel.
(2) Remove the front wheel.
(3) Remove wheel opening molding.
(4) Remove plastic rivets attaching wheelhouse
liner to wheelhouse (Fig. 12).
(5) Separate liner from vehicle.
Fig. 12 Front Wheelhouse Liner
1 – FENDER SPLASH SHIELD
2 – INNER FENDER
3 – INNER FENDER
4 – WHEELHOUSE LINER
5 – FENDER SPLASH SHIELD
6 – PLASTIC RIVET
7 – PLASTIC RIVET
8 – WHEELHOUSE LINER
9 – INNER FENDER
10 – WHEELHOUSE LINER
11 – PLASTIC RIVET
Fig. 11 Hood Seal
1 – INNER HOOD PANEL
2 – HOOD PANEL
DN BODY 23 - 25
REMOVAL AND INSTALLATION (Continued)