Dodge 2000 DURANGO - Coat Hook; Overhead Assist Handle

(4) Engage vanity lamp connector, if equipped.
(5) Install the screws that attach the sunvisor arm
support bracket to the headliner and the roof panel.
COAT HOOK
REMOVAL
(1) Grasp both sides of the coat hook base and
firmly pull outward to disengage the coat hook cover
from the base. (Fig. 103) and (Fig. 104).
(2) Lift/rock the coat hook upward to disengage it
from the roof panel.
INSTALLATION
(1) Position coat hook in roof panel.
(2) Push the coat hook cover inward and secure
the coat hook to the roof panel.
OVERHEAD ASSIST HANDLE
REMOVAL
(1) Remove screws attaching overhead assist han-
dle to roof panel (Fig. 105).
(2) Separate overhead assist handle from roof
panel.
INSTALLATION
(1) Position overhead assist handle on roof panel.
(2) Install screws attaching overhead assist handle
to roof panel (Fig. 105).
Fig. 101 Sunvisor
1 – SUNVISOR
Fig. 102 Sunvisor Support
1 – SUNVISOR SUPPORT BASE
2 – ROOF PANEL
3 – SUNVISOR SUPPORT COVER
Fig. 103 Coat Hook Removal
1 – HEADLINER
2 – COAT HOOK
Fig. 104 Coat Hook
1 – CAB
2 – COAT HOOK
DN BODY 23 - 65
REMOVAL AND INSTALLATION (Continued)