(3) Install fan shroud retaining screws (Fig. 69).
(4) Install fan blade/viscous fan drive assembly to
water pump shaft (Fig. 67).
(5) Connect battery negative cable.
CLEANING AND INSPECTION
RADIATOR CAP
CLEANING
Use only a mild soap and water to clean the radi-
ator cap. Using any type solvent may cause damage
to the seal in the radiator cap.
Fig. 66 Fan Blade and Viscous Fan Drive Removal
1 – SPECIAL TOOL 6958 SPANNER WRENCH WITH ADAPTER
PINS 8346
2–FAN
Fig. 67 Fan Blade/Viscous Fan Drive—4.7L/5.2L/5.9L
Engine
1 – FAN AND VISCOUS DRIVE
2 – WATER PUMP THREADED SHAFT
Fig. 68 Viscous Fan Drive and Fan Blade
1 – VISCOUS FAN DRIVE
2 – FAN BLADE
3 – SCREW AND WASHER
Fig. 69 Upper Fan Shroud Removal/Installation
1 – RADIATOR
2 – ELECTRIC COOLING FAN
3 – UPPER SHROUD AND OVERFLOW BOTTLE
4 – SCREW
5 – LOWER SHROUD
7 - 42 COOLING SYSTEM DN
REMOVAL AND INSTALLATION (Continued)
To Next Page
Loading...
