EasyManua.ls Logo

Dodge 2000 DURANGO - Page 19

Dodge 2000 DURANGO
1054 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
93,000 Miles (149 000 km)
Change engine oil.
Replace engine oil filter.
96,000 Miles (154 000 km)
Change engine oil.
Replace engine oil filter.
Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).‡
Drain and refill automatic transmission fluid
and change filter (4.7L).
Change rear axle fluid.
Change front axle fluid (4x4).
Inspect brake linings.
99,000 Miles (158 000 km)
Change engine oil
Replace engine oil filter.
102,000 Miles (163 000 km)
Change engine oil.
Replace engine oil filter.
105,000 Miles (168 000 km)
Change engine oil.
Replace engine oil filter.
Inspect engine air cleaner element, replace
as necessary.
Inspect auto tension drive belt and replace if
required.
108,000 Miles (173 000 km)
Change engine oil.
Replace engine oil filter.
Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).‡
Drain and refill automatic transmission fluid
and change filter (4.7L).
Change rear axle fluid.
Change front axle fluid (4x4).
Inspect brake linings.
111,000 Miles (178 000 km)
Change engine oil.
Replace engine oil filter.
Drain and refill transfer case fluid.
Inspect front wheel bearings.
Lubricate front suspension ball joints if
required.
Flush and replace engine coolant if it has been
30,00 miles (48 000 km) since last change.
114,000 Miles (182 000 km)
Change engine oil.
Replace engine oil filter.
117,000 Miles (187 000 km)
Change engine oil.
Replace engine oil filter.
120,000 Miles (192 000 km)
Change engine oil.
Replace engine oil filter.
Replace engine air cleaner element.
Replace ignition cables.
Inspect PCV valve, replace as necessary.*
Replace spark plugs.
Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).‡
Drain and refill automatic transmission fluid
and change filter (4.7L).
Change rear axle fluid.
Change front axle fluid (4x4).
Inspect brake linings.
Inspect auto tension drive belt and replace if
required.
*This maintenance is recommended by Chrysler
Corporation to the customer but is not required to
maintain warranty on the PCV valve.
‡Prolonged operation with heavy loading, espe-
cially in hot weather, use of vehicle for off-the-high-
way operation, and trailer towing require the more
frequent transmission service indicated witha‡in
Schedule “B”. Perform these services if the vehicle is
usually operated under these conditions.
Important: Inspection and service should also be
performed any time a malfunction is observed or sus-
pected.
DN LUBRICATION AND MAINTENANCE 0 - 7
SERVICE PROCEDURES (Continued)

Table of Contents

Related product manuals