Domino Ax150i User Manual

OPERATION
EPT019297 Issue 1 November 2016 4-55
Restore from a Backup
Home > Setup > Backup & Restore > Restore
CAUTION: If restoring information to a different printer, it is essential that the printer
hardware is of the same version level. Please contact Domino for advice.
Only Full or Label backup files can be restored to a printer. The information in the backup file will
override the current printer settings.
Note: It is necessary to restart the printer as part of the restore procedure.
(1) Insert the USB flash drive containing the backup file(s) into the USB port on the TouchPanel.
(2) Wait until the USB icon on the information bar turns green.
(3) Select, Home > Setup > Backup & Restore > Restore.
(4) Select the Source Folder and navigate to the location of the backup file(s).
(5) Select the backup file(s).
(6) Select Restore.
(7) A prompt will display showing detailed information about the restore file. Select Continue
labels/full restore to continue the restore process.
Note: Full backups and larger label files may take a few minutes to complete.
(8) A prompt will display when the backup is complete, select OK to clear the prompt.
(9) Remove the USB flash drive from the TouchPanel.
End of procedure.

Domino Ax150i Specifications

General

Print Technology	Continuous Inkjet (CIJ)
Printhead	i-Pulse printhead
User Interface	Touchscreen
Connectivity	Ethernet, USB
Operating Temperature	5°C to 45°C
Ink Type	MEK-free options available
Maximum number of lines	5