Domino Ax150i User Manual

INSTALLATION
EPT019297 Issue 1 November 2016 3-3
PRINTER INSTALLATION
Cabinet Positioning
WARNING: Care must be taken when moving the printer to avoid injury. Only
personnel who have completed manual handling training and have
the appropriate equipment should carry out this task.
Note: For printer dry weight, see the specification on page 2-8.
The cabinet must be positioned in a location with enough clearance to open the doors and give
access to the cabinet’s front and rear. The cabinet must also be positioned on a level surface and
electrically isolated from other equipment, except for a normal data interface.
The printer must be positioned in an area where the temperatures will remain within +5°C and
+45°C (42ºF to 112ºF) and the relative humidity must remain within 10% to 90%
(non-condensing).
The printer draws in and expels cooling air through vents underneath of the cabinet. The air vents
must not be obstructed.

Domino Ax150i Specifications

General

Print Technology	Continuous Inkjet (CIJ)
Printhead	i-Pulse printhead
User Interface	Touchscreen
Connectivity	Ethernet, USB
Operating Temperature	5°C to 45°C
Ink Type	MEK-free options available
Maximum number of lines	5