Domino Ax150i User Manual

OPERATION
4-64 EPT019297 Issue 1 November 2016
STATUSES, ALERTS AND FAULT FINDING
Statuses
Shown below are some printer statuses and their explanations. Printer statuses are displayed on
the Status tab at the top of the QuickStep interface.
Status Name Explanation
Off The ink jet is off and the printer will not print, but the user interface
can still be used.
Sequencing On The printer is getting ready to print. Once completed, the printer
will be in a Ready state.
Printhead warming up The printer is heating the print head to the optimum temperature
for the ink.
Ready The printer is ready to print. If a label is on-line, it will print on
receiving a product detect signal.
Sequencing Off The printer is changing from the Ready state to the Off state.
Gutter clearing in progress The print head gutter is being cleared to stop ink from drying and
blocking the gutter.

Domino Ax150i Specifications

General

Print Technology	Continuous Inkjet (CIJ)
Printhead	i-Pulse printhead
User Interface	Touchscreen
Connectivity	Ethernet, USB
Operating Temperature	5°C to 45°C
Ink Type	MEK-free options available
Maximum number of lines	5