EasyManua.ls Logo

Doosan DE12T - Cooling System

Doosan DE12T
175 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.8. Cooling System
The engine has a liquid-cooling system. The fresh water pump is a maintenance-free by gear
from the crankshaft.
Depending on the agreed extent of delivery and the design of the engine, the coolant circuit can
be equipped with temperature monitors which, in the event of loss of coolant, shut the engine
down.
¥
Check the coolant level of the expansion tank by removing the expansion tank filler cap, and
add coolant if necessary.
¥
When injecting antifreeze solution, first drain out the old coolant from the cylinder block and
radiator, and then clean them with cleaning solution.
¥
Be sure to mix soft water with antifreeze solution.
- 17 -
Water pipe
Reserve tank
Thermostat
EJM4001I
Cylinder head
Cylinder block
Water pump

Table of Contents