Serial Data Handshaking Setup Menu
HS Serial Data Output Handshaking
Determines the type of serial data handshaking
used.
oFF No handshaking is used. Data is sent when ready,
receiving device (printer) must be fast enough to keep
up with the data.
SF Software handshaking. Data is sent when ready.
Transmission can be stopped by sending the
scale an "xoff" (ASCII character 17 or Ctrl-Q).
Transmission resumes by sending the scale an
"xon" (ASCII character 19 or Ctrl- S). When "xon"
is received, the scale will finish sending the data
in progress at the time of "xoff."
A print request can be generated by sending the
scale a "W" (ASCII character 87). This print
request is identical to a push-button print
request.
The software handshaking option activates
Bi-directional RS232 communications.
CtS CTS Handshaking. Data is sent only when CTS is
active.
Units Conversion Setup Menu
CSL Convert Select Modes
Determines which units selections will be
active.
CA *
Convert All. lb, kg, g, oz and lb-oz are active.
Lgo lb, kg, g and oz are active.
Lh lb and kg are active.
Lo lb and oz are active.
go g and oz are active.
NOTE: The Legal for Trade mode disables certain options and
selections listed above. These items have been indicated
by an asterisk.
21
To Next Page
Loading...
