E7900 Series KD10114-E-1122
3
Please read and follow all directions carefully.
Target Audience
These instructions are designed for use by maintenance professionals or lock installers who are familiar with
common safety practices and competent to perform the steps described. dormakaba is not responsible for damage or
malfunction due to incorrect installation however arising.
Definition of Terms
In these instructions, the term ASM refers to American Standard Mortise, and ADB refers to Autodeadbolt Mortise.
Technical Assistance
For technical assistance, call:
E7900 Support with Enterprise software: 800.849.8324
E7900 Support with Aurora or LUNA software
For US or Canada only: 888.539.7226
Outside of US or Canada: 905.430.7226
IMPORTANT
Carefully inspect windows, doorframe, door, etc. to ensure that the recommended procedures will not cause damage.
dormakaba standard warranty does not cover damages caused by installation.
For all mortise models the gap between the mortise front plate and the strike must not exceed 1/4 “
IMPORTANT
Door Door Frame
Mortise
Max. 1/4"
CAUTION
Wear safety glasses when making the holes.
1 Introduction and disclaimers