5 Programming and Software Setup - M-Unit
1. Plug the USB side of the cable into the USB port of
the computer and the USB Mini-B side of the cable
into the USB port on the M-Unit.
2. Open the Aurora software client and enter a valid
username and password.
3. From the main menu, select the “Settings” icon
then click “Application Utilities”
4. Click on the “E-Plex Utilities” upper tab
5. Click the “Import Offline Lock Audits” button, located
in the Offline Locks section at the bottom of the
screen
6. Navigate through your computer to find the E-Plex M-
Unit folder (When plugged in to the computer, the M-
Unit should appear as a new drive). Select the Audit
file you wish to view and click Open. The Audit file will
be named “AUD” plus the name you gave the
corresponding E-Plex Door in the Aurora software.
“Importing Audits” will be displayed as the file is being
uploaded (this may take several minutes)
7. Upon completion, all Audit information can now be
viewed when creating a Transaction report. To create
a Transaction report, click the “Reports” icon on the
Aurora main menu, then select “Transaction Report”.
For more information on setting up and running a
Transaction Report, please consult the Aurora Online
Help by pressing F1 on your keyboard.
M-Unit Audits (continued...)
30 E7900 Series
Viewing Audits (Aurora)
5.7.8.
KD10114-E-1122
To Next Page
Loading...
