Half/Pack
®
Issued April 2018
General Information
Copyright 2018, Heil Environmental
Printed in the U.S.A.
General Information
10
STORING REFUSE IN THE BODY
Heil does not recommend storing refuse in the body overnight. The different types of debris and corrosive elements usually
collected can cause severe corrosion inside the body decreasing the life of your body. This corrosion can affect unloading
and decrease the structural life of the body. In addition, storing refuse in the body overnight can increase the risk of fire.
MAINTENANCE/LUBRICATION INFORMATION
Before performing maintenance, check the job carefully to find all the hazards present and make sure all safe guards or
safety devices are in place to protect all persons and equipment involved.
GREASE LUBRICANT RECOMMENDATION
Use a grease gun. Before engaging grease gun, clean the fitting. Always pump enough grease to purge the joint of
contaminated grease and wipe off the excess. Lubricate a unit as given on the lubrication decal on the unit and in the Body
Lubrication Guide paragraph of this section.
Use grade NLG1000 grease or equivalent.
OIL LUBRICANT RECOMMENDATION
Use only non-detergent engine oil to lubricate all moveable mechanical parts not furnished with grease fittings. Apply
sufficient oil to give good lubrication, but do not bathe parts in oil. Always wipe off excess oil.
HYDRAULIC OIL SPECIFICATIONS
Hydraulic fluid is one of the most important component in hydraulic system. It transmits power, provides lubrication and
cooling function and has following features:
High viscosity index
Long service life
Outstanding cold temperature flow properties
Fast water separation
Excellent anti-wear performance
Long term oxidation stability
Superior rust and corrosion protection
Exceptional shear stability / filterability
Excellent thermal and hydrolytic stability
Anti-foam characteristics
High performance of air release characteristics
Current Heil standard hydraulic oil is Shell Tellus S2 VX 32. Please see product TDS and MSDS for more detail information
about it. We strongly recommend to use it on Heil products to get best system performance and oil service life.
The following oils can be used on Heil products if Heil standard hydraulic oil (Shell Tellus S2 VX 32) is not available. But
system performance and/or oil service life may be compromised.
Castrol Dual Range HV 32
Chevron Rando HDZ 32
Mobil DTE 10 Excel 32
To Next Page
Loading...