Dover HEIL Half/Pack Factor AFL - Page 64

Half/Pack
®
Issued April 2018
Maintenance and Adjustment
Copyright 2018, Heil Environmental
Printed in the U.S.A.
Maintenance and Adjustment
58
BODY PREVENTIVE MAINTENANCE CHART
*HOURS OF OPERATION
COMPONENT/SYSTEM
8
40
200
1000
2000
CHECK/SERVICE
Grease Fittings
Lubricate as shown on Body
Lubrication Guide .
Body Undercoating
Inspect body undercoating and repair
as necessary.
Fork Bearing Block Bolts
Each of the four fork bearing block bolt
torques should be 460 Ft-Lbs.
Calibrate Cylinder Sensors
Calibrate cylinder sensors. See
Cylinder Sensors Calibration .
Tailgate Seal Integrity
Packer/Ejector Cylinder Preventive
Maintenance
See Packer/Ejector Cylinder
Preventive Maintenance.
Packer/Ejector Panel Bolt-in
Cylinder Mount Bolts
Check for tightness. Bolt torques
should be 192 Ft-Lbs. (lubricated
threads)
* Daily = 8 hrs. Weekly = 40 hrs. Monthly = 200 hrs. 6 Months = 1000 hrs. Yearly = 2000 hrs.
59
68