Dover Wayne Select S1 - Configuration Start-Up (Units Without Price Displays)

W2940305 Rev 07 8/2019 Dover Fueling Solutions 25
Gallons
Status
4.2.3 Configuration Start-Up (Units without Price Displays)
 The following steps will lead you through loading the most common features that need to
be set according to the site configuration for units without price displays.
4.2.3.1 Sign on to the Dispenser
Enter Configuration Mode
Step IRC Command
V
olume
Display
Status
Display
1 Service engineer
sign on
Press <ENTER>
PASS 1 [blank]
2 Enter default service
engineer password
Type <111> & Press <ENTER> PASS 2 [blank]
3 Re-enter default
service engineer
password
Type <111> & Press <ENTER>
[alternating
software
version & date]
F - -
4.2.3.2 Set the Date and Time
Change Time & Date
4 Go to time & date
function
Type<2> & Press <ENTER> - - - - - - F 02
5 Go to time sub-
function
Press <ENTER> again
[time in
HH.MM format]
(if time is correct
skip to step 8)
2.00
6 Clear display Press <#> [blank] 2.00
7 Enter current time
Type the current time in the 24-hour
format of HHMM & Press <ENTER>
[entered time
in HH.MM
format]
2.00
8 Go to month/day
sub-function
Press <NEXT>
[date in
MM.DD format]
(if date is correct
skip to step 11)
2.01
9 Clear display Press <#> [blank] 2.01
10 Enter current
month/day
Type the current date in the format of
MMDD & Press <ENTER>
[entered date
in MM.DD
format]
2.01
11 Go to year sub-
function
Press <NEXT>
[Year in YYYY
format] (if the
year is correct
skip to step14)
2.02
12 Clear display Press <#> [blank] 2.02
13 Enter current year
Type the current year in the format of
YYYY & Press <ENTER>
[entered year
in YYYY
format]
2.02
14 Return to function
level
Press <ENTER> again - - - - - - F 02
Figure 4-2 In this example, the Status display shows subfunction 2.01
(
date
)
with its value of 11.24
(
November 24
)
shown in the Gallons dis
p
la
y
.