W2940305 Rev 07 8/2019 Dover Fueling Solutions 101
Meter Type Description
01 iMeter w/ WIP
04 xFlo Meter
Events
Logged
Toggles
Toggles Toggles
TogglesToggles
Toggles
Press "Enter"
UC1 - UOM UC1 - Date UC1 - Time
UC2 - TimeUC2 - DateUC2 - UOM
UC3 - UOM
Press "Next"
OR
20 Sec Timeout
Press "Next"
OR
20 Sec Timeout
Press "Next"
OR
20 Sec Timeout
UC4 thru UC9 - UOM
Toggles
Toggles
UC10 - UOM
Press "Next"
OR
20 Sec Timeout
Press "Next"
Toggles
Pulse Output Config Menu
Press "Clear"
Anytime
OR
20 Sec Timeout
Unit of
Measure
Meter
Type
G.3 Unit of Measure Menu
The Unit of Measure (UOM) menu shows the existing UOM (US Gallons or Liters), the existing meter
type (see chart below), and the number of events recorded at the top level menu. You can look at the
detail of each event which shows the UOM for each event along with the date and time that change
took place. The log stores the most recent 10 events. The sub-menu will show “nonE” for the
remaining events once no other changes were recorded. You can press “Clear” at any time to move
to the next upper menu item.
To Next Page
Loading...
