Dräger Infinity Series User Manual

Page 8-4 Infinity Gamma Series VF4
3. Remove the outer epidermal layer as required to reduce skin
impedance. Mildly abrade only the electrode contact site with
ultrafine sandpaper (220-400 grit). Apply the electrodes one
at a time and make sure the electrode gel is in contact with
the abraded skin area.
4. For severely diaphoretic patients, use a benzoin prep for
tighter adherence of the electrodes.
5. Inspect the electrode gel to make sure it is moist. Apply the
pad with a circular motion on the adhesive area first, then
press gently on the gel area to prevent the gel from being
squeezed out.
6. Change electrodes every 24-48 hours to ensure a good quality
signal. However, if the electrocardiographic pattern becomes
less distinct, if the patient is diaphoretic, or if skin irritation
develops, the electrodes must be changed and reapplied
sooner.

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)