Dräger Infinity Series User Manual

Monitor Setup
VF4 Infinity Gamma Series Page 2-9
Assembling MULTIMED and NEOMED Pods
Choose a 5-lead or 6-lead MULTIMED Pod (adult/pediatric appli-
cations) or a N
EOMED Pod (neonatal applications) for your moni-
toring session. Assemble the pods as illustrated prior to connect-
ing them to the monitor. (Parameter-specific patient preparation is
described in the individual parameter chapters.)
1) SpO
2
sensor 2) ECG lead sets 3) Temperature sensor
NOTE: The FiO
2
and TEMP B connectors of the NEOMED™ pod
are not supported with the Gamma Series monitors.
WARNING: Do not use the N
EOMED Pod during electro-
surgery. Use during cautery may result in burns to the
patient or clinical staff.

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)