Dräger Infinity Series User Manual

End-Tidal CO2
VF4 Infinity Gamma Series Page 13-17
Atmospheric Pressure Compensation
The monitor can automatically detect the ambient barometric
pressure and compensate for it during etCO
2
measurements.
Alternatively, you can enter atmospheric pressure values manu-
ally. Current barometric pressure values appear next to the
Atm.
Pressure
selection in the etCO
2
parameter box.
NOTES:
! The type of atmospheric pressure compensation is usually
selected by your hospital’s service personnel. Consult your
Biomed before changing the pressure compensation mode.
! In automatic pressure mode, you cannot change the atmo-
spheric pressure value manually.
STEPS: Selecting the Atmospheric Pressure Mode
1. Click on the etCO
2
parameter box.
2. Click on
More...
3. Click on Atm. Press. Mode.
4. Select the automatic or manual mode and click the knob.

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)