Dräger Infinity Series User Manual

Respiration Monitoring
VF4 Infinity Gamma Series Page 11-15
OxyCRG Monitoring (Neonatal Option)
The monitor offers a neonatal Oxycardiorespirogram (OCRG or
OxyCRG) provided the option is enabled on your monitor (for
more information, see your Dräger representative). Neonatal
OxyCRG is a non-invasive procedure to display a beat-to-beat
heart rate (bbHR) trend, an SpO
2
trend, and a respiration wave-
form simultaneously on a dynamically updated display. (OCRG
monitoring requires that sensors and electrodes for SpO
2
, HR,
and respiration are attached to the patient.)
Displaying OCRG Waveforms
The OxyCRG waveforms are displayed in the second and third
waveform channels.
The second waveform channel shows the beat-to-beat Heart Rate
(bbHR) trend and the SpO
2
trend waveforms. The bbHR trend
has a range of 65 to 290 and is displayed in green. The SpO
2
trend has a range from 75% to 100% and is displayed in white.
The third waveform channel shows a time-compressed respira-
tion waveform (Rsp in blue) or, if etCO
2
is enabled and dis-
played, a time-compressed etCO
2
waveform (RRc in yellow).
You can adjust the size of the OCRG waveform via the
Size
selection in the third waveform channel menu (see below).

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)