Page 2-10 Infinity Gamma Series VF4
Starting the Monitor
1. Press the Power fixed key. The green light indicator in the
key lights up.
2. Wait until the main screen appears at the end of the self-tests.
NOTES:
! If an internal failure or error should occur, the monitor’s screen
turns blank. If this should happen, turn the monitor off, then on
again. In case of persistent failure, remove the monitor from
service and call your Biomed technician.
! Do not use the monitor if you do not have an AC Adapter,
CPS, IDS, or a fully charged battery. Call your Biomed if you
are not familiar with the use of the battery or the power
adapter.
To Next Page
Loading...
