Dräger Infinity Series User Manual

End-Tidal CO2
VF4 Infinity Gamma Series Page 13-19
etCO2 Alarms
The monitor alarms for the following etCO
2
parameters:
! etCO
2
alarm (critical levels of CO
2
saturation in the exhaled
breath).
! iCO
2
alarm (critical levels of CO
2
saturation in the inhaled
breath, or rebreathing).
! RRc alarm (significant changes in the respiratory rate,
derived from the capnogram waveform).
! RRc Apnea alarm (apnea conditions based on the respiratory
rate derived from the capnogram waveform).
In addition, the monitor alarms for unplugged cables, weak sig-
nals, and in the absence of periodic measurement updates.
You can set etCO
2
upper and lower limits for all monitoring
modes within the following range:
! 5 to 95 mmHg for the etCO
2
alarm (0.7 to 12.7 kPa or %).
! 4 to 10 mmHg for the iCO
2
alarm (0.5 to 1.3 kPa or %).
! 5 to 145 breaths per minute for the RRc alarm (mainstream).
! 5 to 65 breaths per minute for the RRc alarm (sidestream).
Turn etCO
2
alarms on or off and set the alarm limits in the Alarm
Limits table (see the chapter Alarms and Messages).

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)