Dräger Infinity Series User Manual

Admission/Discharge/Transfer
VF4 Infinity Gamma Series Page 4-3
Patient Admission
When you turn on the monitor or exit the standby mode, the mon-
itor displays a New Patient? prompt to assure that previously
stored patient data is deleted before you monitor a new patient.
To start monitoring a new patient, press the rotary knob and click
on
New Patient? YES. The monitor deletes all previously stored
monitoring data, including trends, events, and recordings.
To continue monitoring a previous patient, press the rotary knob
and click on
New Patient? NO. The monitor retains previously
stored monitoring data.
NOTE: After a power-cycle or upon leaving standby, all alarms
are turned off for three minutes or until you press the All Alarms
Off fixed key.

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)