Dräger Infinity Series User Manual

End-Tidal CO2
VF4 Infinity Gamma Series Page 13-9
NOTE: Dehumidification and cannula tubing can affect the cali-
bration of the airway adapter. If you change to different combina-
tions or lengths of cannula and dehumidification tubing, perform an
adapter calibration.
5. Snap the sensor into the airway adapter. Align the mark on the
bottom of the adapter with the mark on the bottom of the sen-
sor.
6. If you are switching adapter types (e.g., mainstream to side-
stream, or adult to neonatal), you must perform an adapter
calibration. Refer to the section Calibrating the Adapter and
Sensor in this chapter.
7. Insert the cannula tips into the patient’s nostrils, pass the can-
nula tubing behind the ears, and slide the retaining sleeve up
so that the tubing is snug under the chin.
8. Secure the Capnostat sensor to the bedding or to the patient’s
bed clothing.
9. Make sure the sensor cabling and nasal cannula tubing are
secured and out of the patient’s way.
NOTE: It is important to always position the airway adapter verti-
cally. This prevents patient secretions from obscuring the adapter
windows.

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)