Dräger Infinity Series User Manual

Non-Invasive Blood Pressure
VF4 Infinity Gamma Series Page 15-9
STEPS: Selecting the Inflation Mode
1. Click on the NBP parameter box.
2. Click on
Inflation Mode.
3. Select the desired inflation mode and click the knob.
WARNIN G: In neonatal monitoring mode, a blood pres-
sure higher than the inflation range may activate the
“NBP Cannot Measure”, “NBP No Pulsation”, or “NBP
Mean Only” alarms. If this happens, manually check the
patient’s pressure and, if appropriate, select the Neo 140
inflation mode or switch to a Pediatric inflation mode.

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)