Dräger Infinity Series - Whats New; Support of gas monitoring functions in anesthesia and operating room environments; Support of network laser printers; Improved SpO2 performance during motion artifact

VF4 Infinity Gamma Series Page iii
What’s New
The functionality of the Infinity Gamma Series patient monitor
has been improved and expanded to include the following new
features in software version VF4:
! Support of gas monitoring functions in anesthesia and operat-
ing room environments. The Gamma XL can now display
concentrations of CO
2
, N
2
O, O
2
and of the anesthetic agents
halothane, isoflurane, enflurane, sevoflurane, and desflurane.
The Gamma XL receives these gas values from a Dräger Scio
multigas module. Note: This functionality is only available
for the Gamma XL (and not the Gamma). For information
about multigas monitoring, see Chapter 14, Multigas.
! Support of network laser printers. Recording requests can be
sent from the Infinity Gamma Series monitor via the Infinity
network to a network laser printer. For information about
recording functions, see Chapter 7, Recordings.
! Improved SpO
2
performance during motion artifact. For
information about pulse oximetry, see Chapter 12, Pulse
Oximetry.
NOTES:
!
The Gamma XL monitor with Anesthetic Gas Monitoring
requires FDA 510(k) review.
! The Gamma XL monitor with Anesthetic Gas Monitoring is not
yet licensed in accordance with the Canadian Medical Devices
Regulations.