Dräger Infinity Series User Manual

Monitor Setup
VF4 Infinity Gamma Series Page 2-3
STEPS: Connecting the AC Adapter
1. Connect the AC adapter's cable to the DC input on the moni-
tor’s back panel.
2. Connect the power cord to the AC adapter.
3. Plug the other end of the power cord into a hospital-grade
outlet. The battery charge indicator on the front panel lights
up.
4. Press the
Power fixed key and wait until the display lights up
and the monitor completes its self-test.
If the monitor does not power on, verify the connections and
retry. If it fails again, take the unit out of operation and contact
DrägerService.
WARN IN G: If the outlet or ground conductor is sus-
pect, operate the monitor with a battery.

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)