Instructions for use Polaris 600 37
Assembly and preparation
2 Turn the handle (A) clockwise until the locking
mechanism (C) engages audibly.
3 Check that the handle is securely attached.
Turn the handle counterclockwise to do this.
– To remove the handle, see the supplement to
the instructions for use concerning
reprocessing of Polaris.
Fitting the sterilizable handle
Immediately before an operation, fit the handle
under sterile conditions as follows:
50943
WARNING
Risk of patient injury
The sterilizable handle can fall down into the
operating field if it is not engaged properly.
The handle must be checked for secure
attachment after it has been fitted to the inner
handle.
WARNING
Risk of personal injury and property damage
The handle can fall down into the operating
field if it is not fitted properly.
The handle may only be fitted by users.
5094450945