Dräger Polaris 600

Operation
52 Instructions for use Polaris 600
Reducing illuminance
 Make a wiping motion with one finger to the left
(A) across the surface of the operating section.
The illuminance will be reduced by one step.
 The change in the illuminance is shown by the
LED indicator (B).
Increasing illuminance
 Make a wiping motion with one finger to the
right (A) across the surface of the operating
section.
The illuminance will be increased by one step.
 The change in the illuminance is shown by the
LED indicator (B).
– For further information on illuminance, see
"Technical light data" on page 92.
NOTE
The operating section of the sterilizable handle E
must be dry to guarantee proper operability.
2660728240
A
B
2660628240
A
B