Network Management of Horizon Compact
127
Horizon Compact Release 1.01.00 Wireless Ethernet Product User Manual – Volume 2
Required Action Steps
FOR SNMP v1 or v2c ONLY
get snmp managers Displays a list of managers that can access the system via SNMP v1
and v2c only.
Sequence:
get snmp managers press Enter
The system responds:
Mgr # IpAddress CommunityString
1 192.168.1.133 example text1
2 192.168.1.100 example text2
If there are no managers specified, the system responds:
No managers configured for the system.
set snmp manager [mgr#] [ip
address] [enable/disable]
[community string]
Specifies the SNMP managers to allow access to the system, v1 and
v2c only.
Sequence:
set snmp manager [mgr#] [ip address] [enable/disable]
[community string] press Enter
The system responds:
Mgr# IpAddress Status CommunityString
1 192.7.1.1 disabled public
2 0.0.0.0 disabled public
3 0.0.0.0 disabled public
4 0.0.0.0 disabled public
5 0.0.0.0 disabled public
6 any disabled public
Notes:
1. Only maximum of 5 managers are allowed. If all the managers are
filled in, remove 1 manager by overwriting the particular index.
2. By setting the IP address of last index to 'any' and 'enable',
anybody can have access to the system via SNMP.
To Next Page
Loading...